Detection of Isopeptide Bonds in Monoclonal Antibody Aggregates.

PURPOSE: A major difficulty in monoclonal antibody (mAb) therapeutic development is product aggregation. In this study, intermolecular isopeptide bonds in mAb aggregates were characterized for the first time. We aim to propose a mechanism of covalent aggregation in a model antibody using stressed studies at raised temperatures to aid in the understanding of mAb aggregation pathways. METHODS: Aggregate fractions were generated using raised temperature and were purified using size-exclusion chromatography (SEC). The fractions were tryptically digested and characterized using liquid chromatography hyphenated to tandem mass-spectrometry (LC-MS/MS). RESULTS: An increased amount of clipping between aspartic acid and proline in a solvent accessible loop in the constant heavy 2 (CH2) domain of the mAb was observed under these conditions. Detailed peptide mapping revealed 14 isopeptide bonds between aspartic acid at that cleavage site and lysine residues on adjacent antibodies. Two additional isopeptide bonds were identified between the mAb HC N-terminal glutamic acid or a separate aspartic acid to lysine residues on adjacent antibodies. CONCLUSIONS: Inter-protein isopeptide bonds between the side chains of acidic amino acids (aspartate and glutamate) and lysine were characterized for the first time in mAb aggregates. A chemical mechanism was presented whereby spontaneous isopeptide bond formation could be facilitated via either the aspartic acid side chain or C-terminus.

Photoinduced cross-linking of formulation buffer amino acids to monoclonal antibodies.

The correct choice of formulation buffer is a critical aspect of drug development and is chosen primarily to improve the stability of a protein therapeutic and protect against degradation. Amino acids are frequently incorporated into formulation buffers. In this study we have identified and characterized light induced cross-links between the side chain of histidine residues in an IgG4 monoclonal antibody and different amino acids commonly used in formulation buffers. These reactions have the potential to impact the overall product quality of the drug. The structure of each cross-link identified was elucidated using high performance liquid chromatography (HPLC) hyphenated to tandem mass spectrometry (MS/MS) with higher energy collisional dissociation (HCD). Furthermore, we speculate on the role of amino acids in formulation buffers and their influence on mAb stability. We theorize that whilst the adduction of formulation buffer amino acids could have a negative impact on product quality, it may protect against other pathways of photo-degradation.

Discovery of a Photoinduced Histidine-Histidine Cross-Link in an IgG4 Antibody.

A novel histidine-histidine (His-His) photooxidative cross-link has been identified in an IgG4 antibody. It was formed between the side chain of a histidine residue of the antibody and histidine from the formulation buffer. The structure of the cross-link was elucidated using high performance liquid chromatography (HPLC) hyphenated to tandem mass spectrometry (MS/MS) with higher energy collisional dissociation (HCD). The cross-link was found in multiple conformations, as the location of the oxygen varied. Furthermore, the extent of cross-link formation was shown to correlate with the amount of light the antibody was exposed to as well as the solvent accessibility of each modification site.

Towards absolute quantification of allergenic proteins in food--lysozyme in wine as a model system for metrologically traceable mass spectrometric methods and certified reference materials.

Current routine food allergen quantification methods, which are based on immunochemistry, offer high sensitivity but can suffer from issues of specificity and significant variability of results. MS approaches have been developed, but currently lack metrological traceability. A feasibility study on the application of metrologically traceable MS-based reference procedures was undertaken. A proof of concept involving proteolytic digestion and isotope dilution MS for quantification of protein allergens in a food matrix was undertaken using lysozyme in wine as a model system. A concentration of lysozyme in wine of 0.95 +/- 0.03 microg/g was calculated based on the concentrations of two peptides, confirming that this type of analysis is viable at allergenically meaningful concentrations. The challenges associated with this promising method were explored; these included peptide stability, chemical modification, enzymatic digestion, and sample cleanup. The method is suitable for the production of allergen in food certified reference materials, which together with the achieved understanding of the effects of sample preparation and of the matrix on the final results, will assist in addressing the bias of the techniques routinely used and improve measurement confidence. Confirmation of the feasibility of MS methods for absolute quantification of an allergenic protein in a food matrix with results traceable to the International System of Units is a step towards meaningful comparison of results for allergen proteins among laboratories. This approach will also underpin risk assessment and risk management of allergens in the food industry, and regulatory compliance of the use of thresholds or action levels when adopted.

RNA-induced conformational changes in a viral coat protein studied by hydrogen/deuterium exchange mass spectrometry.

A detailed knowledge of the capsid assembly pathways of viruses from their coat protein building blocks is required to devise novel therapeutic strategies to inhibit such assembly. In the quest for understanding how assembly of single-stranded RNA viruses is achieved at the molecular level, HDX-MS has been used to locate regions of a coat protein dimer that exhibit conformational/dynamical changes, and hence changes in their HDX kinetics, upon binding to a genomic RNA stem-loop known to trigger assembly initiation. The HDX-MS data highlight specific areas within the coat protein dimer that alter their exchange kinetics in the presence of the RNA. These include the known RNA-binding sites, ß-strands E and G, which have a lower susceptibility to HDX when ligand-bound, as may have been expected. In contrast, several exposed regions are unaffected by ligand binding. Significantly in this example, the loop between ß-strands F and G exhibits reduced HDX propensity when the RNA is bound, consistent with previous inferences from NMR and normal mode analysis that suggested a local conformational change at this loop induced by dynamic allostery. These results demonstrate the potential utility of HDX to probe conformational and dynamical changes within non-covalently bound protein-ligand complexes which are of widespread importance in many biomolecular systems.

Conformational changes in oxidatively stressed monoclonal antibodies studied by hydrogen exchange mass spectrometry.

Oxidation of methionine residues in biopharmaceuticals is a common and often unwanted modification that frequently occurs during their manufacture and storage. It often results in a lack of stability and biological function of the product, necessitating continuous testing for the modification throughout the product shelf life. A major class of biopharmaceutical products are monoclonal antibodies (mAbs), however, techniques for their detailed structural analysis have until recently been limited. Hydrogen/deuterium exchange mass spectrometry (HXMS) has recently been successfully applied to the analysis of mAbs. Here we used HXMS to identify and localise the structural changes that occurred in a mAb (IgG1) after accelerated oxidative stress. Structural alterations in a number of segments of the Fc region were observed and these related to oxidation of methionine residues. These included a large change in the hydrogen exchange profile of residues 247-253 of the heavy chain, while smaller changes in hydrogen exchange profile were identified for peptides that contained residues in the interface of the C(H)2 and C(H)3 domains.

Fully traceable absolute protein quantification of somatropin that allows independent comparison of somatropin standards.

BACKGROUND: Measurement traceability in clinical chemistry is required to standardize clinical results irrespective of the measurement procedure and laboratory. The traceability of many protein substances is maintained by reference to the first standard produced, which may no longer exist, with values assigned by consensus. Independent methods that provide traceability to the Système d'Unité International for all relevant properties of a protein standard could remove reliance on the original standard preparations. METHODS: We developed a method based on the traceable quantification of tryptic peptides released from the protein by isotope dilution mass spectrometry to compare 2 standard preparations of somatropin (recombinant human growth hormone), WHO 98/574 and Ph.Eur.CRS S0947000. Relative quantification using isotope-coded affinity tagging, isobaric tagging for relative and absolute quantification, and standard additions were also performed to validate the digestion method used and to determine whether any modifications were present. RESULTS: The total somatropin content in both materials was determined and an uncertainty estimation undertaken [WHO 2.19 +/- 0.21) mg/vial, European Pharmacopeia 2.06 +/- 0.21 mg/vial]. Each uncertainty in this paper is a fully estimated uncertainty, with 95% CI (k = 2). Isotope coded affinity tag and standard addition results fully validated the robustness of the digestion method used. In addition, iTRAQ (isobaric tagging for relative and absolute quantification analysis) identified 2 modifications, neither of which impacted the quantification. CONCLUSIONS: An independent method that does not rely on a preexisting protein standard has been developed and validated for the traceable value-assignment of total somatropin. The methods reported here address the amount of substance (mass fraction) of the standard materials but address neither biological activity nor other characteristics that may be important in assessing suitability for use as a calibrator.

Assessment of the repeatability and reproducibility of hydrogen/deuterium exchange mass spectrometry measurements.

A system to perform automated hydrogen/deuterium exchange mass spectrometry measurements was constructed using an XYZ robotic autosampler that was capable of performing solvent manipulations and a 4.7 T Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. The system included features such as the first demonstration of a 'dual column' high-performance liquid chromatography (HPLC) setup, and a novel digestion strategy. The performance of the system, in terms of the repeatability and reproducibility of the measurement of protein hydrogen/deuterium exchange, was assessed over a 2-month period. The sensitivity of the measurement of hydrogen exchange towards several parameters was assessed, which allowed their impact on the reproducibility to be discussed. The parameters assessed were the temperature of the HPLC columns and switching valves, the temperature of the quench solutions, the pH of the mobile phase, the pH of the quenched solution, the acid used in the mobile phase and the analytical column used.

Protein quantification by isotope dilution mass spectrometry of proteolytic fragments: cleavage rate and accuracy.

The practice of quantifying proteins by peptide fragments from enzymatic proteolysis (digestion) was assessed regarding accuracy, reliability, and uncertainty of the results attainable. Purified recombinant growth hormone (rhGH, 22 kDa isoform) was used as a model analyte. Two tryptic peptides from hGH, T6 and T12, were chosen to determine the amount of the protein in the original sample. Reference solutions of T6 and T12 (isotopically labeled forms), value assigned by quantitative amino acid analysis (AAA) after complete hydrolysis, were used as internal standards. The accuracy of protein quantification by fragments T6 and T12 was evaluated by comparison of peptide results to those obtained for the same rhGH sample by AAA. The rate of cleavage (and thus the experimental protocol used) turned out to be crucial to the quality of results in protein quantification using enzymatic fragments. Applying a protocol customarily found in (qualitative) bottom-up proteomics gave results significantly higher than the target value from AAA (+11% with T6 and +6% with T12). In contrast, using a modified protocol optimized for fast and complete hydrolysis, results were unbiased within the limits of uncertainty, while the time needed for completion of proteolysis was considerably reduced (30 min as compared to 1080-1200 min). The method assessed highlighted three important criteria deemed necessary for successful protein quantification using proteolysis-based mass spectrometry methods. These are the following: the requirement for both the selected peptides and labeled internal standard to be stable throughout digestion; the correct purity assignment to the selected peptide standards; the proof of equimolar release of the selected peptides. The combined (overall) uncertainty for protein quantification was established by combination of estimates obtained for individual components and found to be U = 4% for this example. This uncertainty is of the same order as that typically attainable in quantification of "small" organic molecules using liquid chromatography/isotope dilution mass spectrometry.

Toward Système International d'Unité-traceable protein quantification: from amino acids to proteins.

Here we present a demonstration of the proof of principle that absolute concentration of a protein within a mixture of other proteins can be measured with SI traceability. The method used was based on tryptic digestion of a protein followed by quantification using double exact matching isotope dilution mass spectrometry (IDMS) of the peptides released. To provide full SI traceability to measurements of protein concentration we demonstrated a method of SI traceable peptide quantification in which the peptide standards used were quantified by an amino acid analysis method that incorporated double exact matching IDMS and amino acid standards of known purity. The concentration of the protein was therefore determined based upon the concentration of tryptic peptides, which in turn had been quantified based upon amino acid standards. This allowed fully SI-traceable measurements of protein concentration to be made. Important caveats in the implementation of this approach are also discussed and examples of how these can have detrimental effects on the measurements are shown.

Principles of Fourier transform ion cyclotron resonance mass spectrometry and its application in structural biology.

Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry has become increasingly significant within recent years. The inherently ultra-high resolution and mass accuracy allow unequivocal assignments of chemical formulae to be made and further structural elucidation can be conducted through the utilization of tandem mass spectrometry techniques. With the advent of electrospray ionization (ESI), FT-ICR mass spectrometry has become a powerful tool for the investigation of biological macromolecules, such as the study of non-covalent interactions of proteins. In this article, the basic principles are highlighted, some of the techniques employed are described and examples of applications are provided, with particular respect being paid to the field of characterization of biomolecules.